Washing Lift
1 Ton Three Wheeler Washing Lift
One tonne, one plunger, 1500 mm of clearance.
A single-plunger air-over-oil washing lift rated at one tonne, running on the same 9-12 kg/cm2 shop air as the 4-tonne and 8-tonne twin-post washing lifts. The 1500 x 600 mm platform suits three wheelers and small cars. Standard lifting height is 1500 mm, with 1700 mm available to order.
Specification
Published specification
| Lifting capacity | 1.0 t |
|---|---|
| Number of plungers | 1 |
| Plunger diameter | 112 mm |
| Lifting height | 1500 mm (1700 mm optional) |
| Platform size | 1500 x 600 mm |
| Platform joist size | 4 x 2 in |
| Air pressure required | 9-12 kg/cm2 |
| Oil tank capacity | 45 L |
Fit
What it suits
Three wheeler and small car wash bays, and tyre or lubrication shops that need underbody access without excavating for a full-size four tonne washing lift.
Build
Build details
- Suitable for indoor and outdoor installation
- Wiper rings keep water and dirt out of the hoist cylinder
- Gland rings in the plunger assembly
- Hard chrome plated steel plunger for wear resistance
Deciding between single post and twin post, or which tonnage suits your bay? That comparison lives on the washing lift hub, not repeated here.
FAQ
Frequently asked questions
What is the standard lifting height?
1500 mm, with 1700 mm available to order.
What compressed air supply does it need?
Ordinary shop air covers it — 9-12 kg/cm2, the lightest requirement of any machine in the range, well within what most single-bay workshops already run to their air tools.
What is the platform size?
1500 x 600 mm on 4 x 2 in joists, sized for three wheelers and small cars.
Next step
Ready to enquire?
The 1 Ton Three Wheeler Washing Lift is priced on request, not from a published list — enquire online or call for a quote confirmed against what you need.